Do it yourself
Frequently asked questions about cars and motorcycles

How to Change Engine Oil and Filter in a Nissan Qashqai

Model: Nissan Qashqai J11 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Engine oil

See other generations:
Video tutorial

To change the engine oil and filter in a Nissan Qashqai, warm up the engine for a few minutes, then turn it off and lift the vehicle. Place a container under the oil sump and unscrew the drain plug to let the used oil flow out completely.

Once drained, re-screw the plug, tightening it properly. Locate the oil filter, usually positioned at the bottom of the engine.

Unscrew it with an oil filter wrench and remove it. Before fitting the new filter, lubricate the seal with a bit of clean oil and screw it in by hand until tight. Open the oil filler cap on the engine and pour in the amount of oil specified for your engine.

Start the engine for a few seconds, then turn it off and check the level with the dipstick, adding oil if necessary.


Posted on 28 April 2026 by ScegliAuto


Related tutorials

Nissan Qashqai (2021-2026 / J12) In this guide for your Nissan Qashqai J12 (2021-2023), discover how to quickly and safely replace the oil filter. Before you start, ensure the car is…
Nissan Qashqai (2014-2022 / J11) This short video tutorial will explain how to replace the oil filter and engine oil on the Nissan Qashqai 1.6 DCi. It is very important to use oil re…
Nissan Qashqai (2006-2014 / J10) The first step when changing the engine oil in a car is to unscrew the filler cap so that the used oil drains out more easily. After doing this, lift…

Other guides you may be interested in

    Frequently Asked Questions

    • Qashqai 2006-2014 - What is the right amount of engine oil for the Nissan Qashqai 1.6 dci? Read answer
    • Qashqai 2014-2022 - Where is the oil dipstick of the Nissan Qashqai located? Read answer
    • Qashqai 2014-2022 - Where is the Nissan Qashqai 1.5 dCi engine oil dipstick located? Read answer

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos