Do it yourself
Frequently asked questions about cars and motorcycles

How to change the engine oil on the Nissan Qashqai

Model: Nissan Qashqai J12 - Years: 2021, 2022, 2023, 2024, 2025, 2026
Part: Engine oil

See other generations:
Video tutorial

To change the engine oil on a Nissan Qashqai, it is preferable to lift the car on a workshop ramp as it can be quite awkward to work in a tight space. This vehicle has a panel protecting the underside that must be removed before changing the oil. Once this panel is removed, locate the oil sump and unscrew the bolt to allow the old oil to drain out. Next, move on to the oil filter, which must be removed from its housing, and replace the cartridge and seal.

Finally, refit the protection panel and add the new engine oil.


Posted on 28 September 2026 by ScegliAuto


Related tutorials

Nissan Qashqai (2006-2014 / J10) Resetting the service light on a 2013 Nissan Qashqai must be done after all necessary servicing operations have been completed at the garage. The bas…
Nissan Qashqai (2006-2014 / J10) The first step when changing the engine oil in a car is to unscrew the filler cap so that the used oil drains out more easily. After doing this, lift…
Nissan Qashqai (2014-2022 / J11) After performing a complete engine oil change and replacing the filter, you can reset the maintenance light on your Nissan Qashqai. Start by insertin…

Other guides you may be interested in

    Frequently Asked Questions

    • Qashqai 2006-2014 - What is the right amount of engine oil for the Nissan Qashqai 1.6 dci? Read answer
    • Qashqai 2014-2022 - Where is the oil dipstick of the Nissan Qashqai located? Read answer
    • Qashqai 2014-2022 - Where is the Nissan Qashqai 1.5 dCi engine oil dipstick located? Read answer

How to Remove the Rear Seats of a Nissan Qashqai?

It is normal to need to clean the seats of your car over the years, or to carry out a repair or replacement of the upholstery. If you are doing any of these tasks yourself, you need to remove the seats independently and start the job. For the rear seats of the vehicle in question, here’s how to do it: Grasp the seat base on both sides and lift, ensuring that the fixing tabs disengage. Continue by unhooking the seatbelt connectors from the seats and finish by extracting the entire structure from the cabin.

Watch the video!


by ScegliAuto

More videos