Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Fan on Nissan Note

Model: Nissan Note E11, MK 1 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Blower motor

See other generations:
Video tutorial

Open the glove compartment and unscrew the six screws securing it. At this point, detach and remove the entire drawer by hand, and place it on the driver's seat. Now you can work on the affected area: disconnect the connector attached to the fan and, applying pressure on its housing, rotate it slightly clockwise until you feel it has come out of its seat.

Once removed, unscrew the upper cover to access the fan, then unscrew the fan itself and insert the new one into the upper housing, then replace the lower cover. Reassemble everything by proceeding in reverse.


Updated on 3 April 2026 by ScegliAuto


Related tutorials

Replacing the Air Conditioning Fan Resistor on the Nissan Note E11
Replacing the Air Conditioning Fan Resistor on the Nissan Note E11
Nissan Note (2004-2013 / E11, MK 1) In today's tutorial video, we will go through the steps to remove and replace the air conditioning fan resistor on the Nissan Note E11. First, get in…
How to change the pollen filter and fan on a Nissan Note
How to change the pollen filter and fan on a Nissan Note
Nissan Note (2012-2022 / MK 2, E12) In this video we see how to change the cabin air filter of a Nissan Note: it is a manual air conditioner, and on this car there were several problems…
How to Reset the Service Light on a 2011 Nissan Note
How to Reset the Service Light on a 2011 Nissan Note
Nissan Note (2004-2013 / E11, MK 1) To manually reset the service light on your 2011 Nissan Note, follow the steps outlined in this guide. First, get into the car and reach the driver's…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos