Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Reverse Light Bulb Replacement on Nissan Qashqai 2

Model: Nissan Qashqai J11 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Light bulb

See other generations:
Video tutorial

In this video tutorial, you will learn how to remove and replace the reverse light bulb on a second-generation Nissan Qashqai. First, open the boot and remove the panel of the tailgate by prying it from the sides; then remove the screw of the handle using a cross-head screwdriver.

At this point, disconnect the connector and the entire bulb holder by turning it to remove the reverse bulb; now take out the old bulb and replace it with the new one (a LED bulb is fitted). Insert the new bulb and reassemble everything!


Updated on 2 May 2026 by ScegliAuto


Related tutorials

Instructions for Replacing Reverse Light Bulb on Nissan Qashqai
Instructions for Replacing Reverse Light Bulb on Nissan Qashqai
Nissan Qashqai (2014-2022 / J11) In this short video, you will learn how to remove the reverse and fog light bulbs on a second-generation Nissan Qashqai in simple steps. First, open …
Guide to Replace the Reverse Switch on a Nissan Qashqai J11
Guide to Replace the Reverse Switch on a Nissan Qashqai J11
Nissan Qashqai (2014-2022 / J11) Today, we will see in this brief guide how to remove and replace the reverse switch on a Nissan Qashqai J11, second series, following the instruction…
How to Replace the Reverse Switch on Nissan Qashqai 1.5 dCi
How to Replace the Reverse Switch on Nissan Qashqai 1.5 dCi
Nissan Qashqai (2006-2014 / J10) Below are the instructions that will allow you to remove and replace the reverse switch on the Nissan Qashqai 1.5 dCi. First, open the bonnet of the …

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos