Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Qashqai
    4. : Nissan Qashqai reversing bulb replacement instructions

Nissan Qashqai - Video tutorial

Model: Nissan Qashqai J11 - Years 2014-2022
Part: Light bulb
Operation: Nissan Qashqai reversing bulb replacement instructions

In this short video we will see how to remove the reverse and rear fog light bulbs of a second series Nissan Qashqai in simple steps. First we open the tailgate of the trunk and unscrew the screws of the plastic panel that we find in the grip handle and on the sides: then we remove the panel by levering the sides and pulling hard. At this point we can unhook the electrical connector and extract the lamp holder together with the bulb and replace it with the new one; the video illustrates the replacement of traditional filament bulbs with led ones.


Posted on 25 December 2023 by ScegliAuto

    Frequently Asked Questions

    • Qashqai 2014-2022 - How to replace front bulbs on Nissan Qashqai? Read Answer
    • Qashqai 2021-2028 - Why don't my Nissan Qashqai's interior lights come on? Read Answer
    • Qashqai 2006-2014 - What bulbs does the Nissan Qashqai J10 fit? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos