Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Light Bulb on a Nissan Qashqai

Model: Nissan Qashqai J10 - Years 2006-2014
Part: Headlight bulb

To replace the front light bulb on a Nissan Qashqai model J10, follow these steps: - The first step is to open the front bonnet; - The second step is to disconnect the connector and then remove the bulb; - The third step is to insert a new bulb into the light and connect it with its connector; Finally, check the bulb's operation by turning on the vehicle. If there are no issues, you can proceed to the right front light. To replace the right bulb, follow the same steps outlined above.

Updated on 26 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front headlight bulb of the Nissan Qashqai
How to replace the front headlight bulb of the Nissan Qashqai
Nissan Qashqai (2014-2022 / J11) Today we will explain how to independently replace the bulbs in the left front headlight of the Nissan Qashqai. To replace the turn signal bulb, we w…
How to Replace the Front Headlight Bulbs on a Nissan Qashqai
How to Replace the Front Headlight Bulbs on a Nissan Qashqai
Nissan Qashqai (2006-2014 / J10) Open the bonnet by pulling the lever located at the bottom right of the dashboard and secure it with the prop rod. Remove the inspection cover from t…
How to Replace the Front Headlamp Bulbs of the Nissan Qashqai
How to Replace the Front Headlamp Bulbs of the Nissan Qashqai
Nissan Qashqai (2014-2022 / J11) In today’s video, you will see how to remove and replace the front headlamp bulbs of the Nissan Qashqai. First, open the bonnet of your car and start…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos