Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Qashqai
    4. : How to replace the headlight bulb on Nissan Qasqai?

Nissan Qashqai - Video tutorial

Model: Nissan Qashqai J11 - Years 2014-2022
Part: Light bulb
Operation: How to replace the headlight bulb on Nissan Qasqai?

In order to replace the Nissan Qashqai headlight bulb, you need to open the hood to access the engine compartment and remove the protective cap located in the rear part of the headlight. In the case of the headlight on the passenger side, it will be necessary to remove the washer fluid reservoir to access. Once the cap has been removed, it will be possible to disconnect the connector and extract the old bulb from its housing. Now, the new bulb will have to be connected to the connector and inserted inside its seat, sealing the rear part of the headlight with the special cover.


Posted on 17 March 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Qashqai 2014-2022 - How to replace front bulbs on Nissan Qashqai? Read Answer
    • Qashqai 2021-2028 - Why don't my Nissan Qashqai's interior lights come on? Read Answer
    • Qashqai 2006-2014 - What bulbs does the Nissan Qashqai J10 fit? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos