Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Qashqai
    4. : How to replace the front headlight bulb of the Nissan Qashqai?

Nissan Qashqai - Video tutorial

Model: Nissan Qashqai J10 - Years 2006-2014
Part: Headlight bulb
Operation: How to replace the front headlight bulb of the Nissan Qashqai?

In this short and simple guide, we will see how to disassemble and replace the headlight bulb of the Nissan Qashqai. First, we open the hood of our car and start removing the plastic protective cover that we find behind the headlight. Then, we take out the low beam bulb from the headlight, disconnecting its electrical connector, as shown in the video. At this point, we remove the bulb from the metal holder and install the new one (of the correct type and with the same attachment). Then, we connect it and reassemble everything!


Posted on 13 July 2023 by ScegliAuto

    Frequently Asked Questions

    • Qashqai 2006-2014 - How do you replace the front headlight bulb on a Nissan Qashqai? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos