Do it yourself
Frequently asked questions about cars and motorcycles

Resetting Airbag Light on Nissan Qashqai

Model: Nissan Qashqai J10 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Warning light – error code

See other generations:
Video tutorial

Turn on the instrument panel (not the engine) with the ignition key. When the airbag light starts flashing, AT THE FIRST FLASH, turn the key off. Wait five seconds, turn the ignition back on, and repeat the operation: at the first flash, turn off the instrument panel.

Repeat this process until the airbag light stops flashing; usually, this requires three repetitions.

This is an extremely simple and straightforward procedure that will reset the light, which has likely illuminated by mistake.


Updated on 4 May 2026 by ScegliAuto


Related tutorials

Nissan Qashqai (2014-2022 / J11) In this short video tutorial, you will learn how to turn off and reset the airbag light on a Nissan Qashqai second generation; before performing the …
Nissan Qashqai (2006-2014 / J10) Today's instructions will allow us to reset the airbag malfunction warning light on the Nissan Qashqai in a few simple steps. First, it is necessary …
Nissan Qashqai (2006-2014 / J10) In today's tutorial, discover how to reset the airbag warning light that flashes on the instrument cluster of the Nissan Qashqai J10, first series. F…

Other guides you may be interested in

    Frequently Asked Questions

    • Qashqai 2014-2022 - What does it mean when the "chassis control system error" indication lights up on the Nissan Qashqai? Read answer
    • Qashqai 2014-2022 - What does the yellow brake warning light on the Nissan Qashqai mean? Read answer
    • Qashqai 2014-2022 - Why is the Nissan Qashqai handbrake warning light flashing? Read answer
    • Qashqai 2014-2022 - What does the red engine light on the Nissan Qashqai mean? Read answer

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos