Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Nissan Qashqai

Model: Nissan Qashqai J10 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Service warning light

See other generations:
Video tutorial

If you want to remove the service light from the dashboard display of your Nissan Qashqai easily and for free, follow these steps. First, enter the vehicle and ensure all doors are properly closed.

Next, insert the key and turn on the ignition (do not start the engine). At this point, locate the button just below the speedometer and press it multiple times until you see the "Settings" option.

Then, hold the same button for a couple of seconds to enter the various settings. Rotate it to the right to scroll down and select the "Maintenance" option.

Do the same to enter "Service" and finally select "Reset". A few moments later, the reset is complete, and you can exit the menu.


Updated on 8 May 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on the Nissan Qashqai?
How to Reset the Service Light on the Nissan Qashqai?
Nissan Qashqai (2006-2014 / J10) From the instrument panel of the Nissan Qashqai, you can remove the Service light by turning on the ignition and turning the key in the corresponding…
How to reset the service light on the Nissan Qashqai 2018
How to reset the service light on the Nissan Qashqai 2018
Nissan Qashqai (2014-2022 / J11) To manually reset the service light of your 2018 Nissan Qashqai, you simply need to follow the steps described in the following guide. First of all, …
How do you reset the Service light of the Nissan Qashqai?
How do you reset the Service light of the Nissan Qashqai?
Nissan Qashqai (2006-2014 / J10) On the instrument panel of the Nissan Qashqai, the Service light that appears can be reset by turning on the instrument panel and inserting the appro…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos