Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Qashqai
    4. : How to replace the battery in the Nissan Qashqai?

Nissan Qashqai - Video tutorial

Model: Nissan Qashqai J11 - Years 2014-2022
Part: Battery
Operation: How to replace the battery in the Nissan Qashqai?

As we can see in this tutorial, replacing the battery in the Nissan Qashqai is a very simple and fast operation. First of all, make sure that the key is not inserted in order to operate in complete safety, then open the bonnet and disconnect the negative pole by loosening the relative nut with a 10mm wrench. Next, we disconnect the positive pole in the same way and unscrew the fixing nuts of the upper bracket. At this point we can remove the old battery and mount the spare one, taking care to reconnect the positive pole first.


Posted on 5 May 2024 by ScegliAuto

    Frequently Asked Questions

    • Qashqai 2014-2022 - What problems does the Nissan Qashqai's Start & Stop have? Read Answer
    • Qashqai 2014-2022 - What does the message "System Error" on the Nissan Qashqai mean? Read Answer
    • Qashqai 2014-2022 - What does chassis control system failure mean on a Nissan Qashqai? Read Answer
    • Qashqai 2014-2022 - What to do if the Nissan Qashqai does not start? Read Answer
    • Qashqai 2014-2022 - What to do in case Start and Stop is faulty on Nissan Qashqai? Read Answer
    • Qashqai 2006-2014 - How much is the battery for the Nissan Qashqai 1.5 dci? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos