Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Wiper Blades on the Nissan Micra

Model: Nissan Micra K12 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Windshield wipers

See other generations:
Video tutorial

If you need to replace the front wiper blades on your vehicle, follow the simple instructions provided below and refer to the images in the video. Lift the wiper arm, open the fastening hook located on the central pivot, and detach the blade.

Take the new blade and insert it into the holder, then secure the hook again. Next, lift the arm of the second wiper and repeat the same procedure used to change the first blade to replace the second one.


Updated on 22 May 2026 by ScegliAuto


Related tutorials

How to Replace the Wiper Blades on the Nissan Micra?
How to Replace the Wiper Blades on the Nissan Micra?
Nissan Micra (2002-2010 / K12) To replace the wiper blades on the Nissan Micra, lift the arms so that the blades are no longer in contact with the windscreen; then tilt the blade a…
How to replace the front wipers on a Nissan Micra
How to replace the front wipers on a Nissan Micra
Nissan Micra (2010-2017 / K13) Today, we will see the guide that allows you to remove and replace the front wipers (this also applies to the rear) on the Nissan Micra. First, move …
Wiper Motor Replacement on a Nissan Micra
Wiper Motor Replacement on a Nissan Micra
Nissan Micra (1992-2002 / K11) Remove the wiper motor from a Nissan Micra. Locate the motor under the front windscreen. Remove the plastic cover from under the windscreen along wit…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos