Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Micra
    4. : How to replace the front windshield wipers of the Nissan Micra.

Nissan Micra - Video tutorial

Model: Nissan Micra K13 - Years 2010-2017
Part: Windscreen wipers
Operation: How to replace the front windshield wipers of the Nissan Micra.

Today we will see the guide that will allow us to disassemble and replace the front windshield wipers (but it also applies to the rear one) of the Nissan Micra. First, let's move to the front of the car and start lifting the wiper arm; then we rotate and detach the wiper blade from the arm, in order to remove it, as shown in the video. At this point, we install the new wiper blade, with the same dimensions, by properly attaching it to the arm; all that's left is to replace the other wiper blade if necessary, using the same procedure!


Posted on 12 November 2023 by ScegliAuto



Replacement of the rear windshield wiper of the Nissan Micra.
Nissan Micra (2002-2010 / K12) Below we will see the main steps useful for disassembling and replacing the rear windshield wiper or the rear windshield wiper arm of the Nissan Micr
Replacing the wiper motor on Nissan Micra
Nissan Micra (1992-2002 / K11) Remove the windshield wiper motor of a Nissan Micra? Let's see how the Micra vehicle is disassembled from inside. The fan is found under the front wi
How do you replace the windshield wiper blades of the Nissan Micra?
Nissan Micra (2002-2010 / K12) In order to replace the windshield wiper blades of the Nissan Micra, you need to lift the wiper arms so that the blades are no longer in contact with

    Frequently Asked Questions

    • Micra 2002-2010 - Why are the wipers on Nissan Micra not working? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos