Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Wiper Blade on a Nissan Micra K13

Model: Nissan Micra K13 - Years 2010-2017
Part: Windshield wipers

In this short video, you will see how to change the rear wiper blade on a Nissan Micra K13, third generation, in simple and quick steps. First, lift the wiper arm; then rotate the wiper blade to detach it from its mount and remove it, as shown in the video. At this point, place the new wiper blade into position where the groove is located; now you can close the arm and check the operation of your wiper. Follow the same replacement procedure for the front wipers!

Updated on 17 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front wipers on a Nissan Micra
How to replace the front wipers on a Nissan Micra
Nissan Micra (2010-2017 / K13) Today, we will see the guide that allows you to remove and replace the front wipers (this also applies to the rear) on the Nissan Micra. First, move …
Replacement of Rear Wiper Blade for Nissan Micra
Replacement of Rear Wiper Blade for Nissan Micra
Nissan Micra (2002-2010 / K12) Below are the main steps to remove and replace the rear wiper blade of the Nissan Micra. First, move to the rear of the vehicle and begin to lift the…
How to replace the rear windshield wiper of the Nissan Micra
How to replace the rear windshield wiper of the Nissan Micra
Nissan Micra (2010-2017 / K13) In today's article, we will show you how to replace the windshield wiper blade of the Nissan Micra 3rd series. The procedure takes less than 1 minute…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos