Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fuel Pump on a Nissan Livina Mk1 1.5

Model: Nissan Livinia Grand Livinia MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Fuel pump

See other generations:
Video tutorial

This guide shows how to replace the fuel pump on a Nissan Livina Mk1 1.5. The first step is to lift the right rear seat cushion and remove the plastic panel to access the fuel pump inspection area. Remove the cover, the electrical connector of the pump, and the retaining ring.

Take out the old pump, being careful to let the fuel drain. Install the new pump and reassemble everything in place.

Check the proper operation of the part before hitting the road.


Updated on 22 May 2026 by ScegliAuto


Related tutorials

How to Reset the Maintenance Light on a Nissan Livina Grand Livina
How to Reset the Maintenance Light on a Nissan Livina Grand Livina
Nissan Livinia Grand Livinia (2006-2013 / MK 1) In this guide, you will learn how to reset the maintenance light for the Nissan Livina Grand Livina. To proceed, follow these steps in order: 1. Turn…
How to Replace the Radiator in the Nissan Livina?
How to Replace the Radiator in the Nissan Livina?
Nissan Livinia Grand Livinia (2006-2013 / MK 1) To replace the radiator in the Nissan Livina, open the hood to access the screws securing the cover at the front of the engine compartment. This cove…
How to Replace the Cabin Filter in a Nissan Grand Livina?
How to Replace the Cabin Filter in a Nissan Grand Livina?
Nissan Livinia Grand Livinia (2013-2020 / MK 2) In this tutorial, we will see how to replace the cabin filter in a Nissan Grand Livina, a very simple and quick operation. First, sit in the passenge…

Other guides you may be interested in

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos