Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Maintenance Light on a Nissan Livina Grand Livina

Model: Nissan Livinia Grand Livinia MK 1 - Years 2006-2013
Part: Warning light – error code

In this guide, you will learn how to reset the maintenance light for the Nissan Livina Grand Livina. To proceed, follow these steps in order: 1. Turn on the instrument cluster and keep it on for about 3 seconds; 2. Turn off the cluster for about 10 seconds; 3. Turn the cluster back on and keep it on for about 3 seconds, then press the accelerator pedal 5 times in a row; 4. At this point, hold the accelerator pedal down for about 7 seconds; 5. Repeat step 4 about 3-4 times, releasing the accelerator and repeating in a steady rhythm; 6. If the light goes off after blinking for a few seconds when starting the engine, the procedure was completed successfully.

Updated on 18 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Key Battery in the Nissan Livinia Grand Livinia
How to Replace the Key Battery in the Nissan Livinia Grand Livinia
Nissan Livinia Grand Livinia (2013-2020 / MK 2) To quickly and safely replace the battery in your Nissan Livinia Grand Livinia Mk2 key, you only need a flathead screwdriver. Let's see how to do it.…
How to Remove the Radio from Nissan Grand Livina
How to Remove the Radio from Nissan Grand Livina
Nissan Livinia Grand Livinia (2013-2020 / MK 2) In this video tutorial, you will see the main steps to remove and replace the stock radio in the Nissan Grand Livina. First, get inside the vehicle a…
How to Change the Oil on a Nissan Grand Livina
How to Change the Oil on a Nissan Grand Livina
Nissan Livinia Grand Livinia (2013-2020 / MK 2) To change the oil on a Nissan Grand Livina comfortably, lift the vehicle - do not rely too much on your jack; if possible, use a wheel as a spacer - …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos