Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Service Light on a Nissan NV200

Model: Nissan Nv200 MK 1 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Warning light – error code

Video tutorial

To reset the service light on a Nissan NV200, start by turning on the ignition. Press the button on the left side of the speedometer until the "settings" message appears; rotate the same button to the right until the "details" message lights up, then press the button to confirm.

Rotate the button again to the right until the "maintenance" message lights up and press the button to confirm. Rotate the button to the right once more until the "service" message lights up and press the button to confirm.

Note the mileage for the service, then press the button to go back. With the "service" message illuminated, hold down the same button until the "reset" message appears, rotate the button to the right to highlight it, and press to confirm.

Rotate the button to highlight the "confirm" message and press again. Now go back to "maintenance", then to "service" to check if the reset was successful.

Finally, return by rotating the button to the "exit" or "back" options, press it, and then turn off the ignition.


Updated on 23 May 2026 by ScegliAuto


Related tutorials

Nissan Nv200 (2009-2024 / MK 1) If you own a Nissan NV200 and want to know how to manually reset the service light, the following guide is all you need. First, get into the car and …
Nissan Nv200 (2009-2024 / MK 1) Follow these simple steps to reset the service light for the regular maintenance oil change on the Nissan NV200. First, get into the vehicle and turn…
Nissan Nv200 (2009-2024 / MK 1) When the service light activates on the dashboard and onboard computer of the Nissan NV200, you need to go to an authorised workshop to complete the …

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos