Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Outside Rearview Mirror on the Nissan Frontier

Model: Nissan Frontier D40 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
Part: Side mirror

See other generations:
Video tutorial

Today, you will learn how to remove and replace the outside rearview mirror on the Nissan Frontier in simple steps. First, open the front door and start removing the plastic cover located behind the mirror by prying the sides with something thin.

Then, unscrew the screws securing the door panel, disconnect the handle cable, and the electrical connector for the switch, as shown in the video. At this point, detach the panel and unscrew the mirror screws; pull it out from the outside and replace it with the new one!


Updated on 25 May 2026 by ScegliAuto


Related tutorials

How to Replace the Outside Rearview Mirror on the Nissan Frontier
How to Replace the Outside Rearview Mirror on the Nissan Frontier
Nissan Frontier (1997-2021 / D40) Today's steps will show you how to remove and replace the outside rearview mirror on the Nissan Frontier, following the instructions below. First, op…
How to Remove the Interior Rearview Mirror on a Nissan Frontier
How to Remove the Interior Rearview Mirror on a Nissan Frontier
Nissan Frontier (2021-2026 / D41) To remove the interior rearview mirror on a Nissan Frontier, lower the sun visor and locate the base of the mirror on the windshield. Remove the plas…
How to Replace the Outside Rearview Mirror on a Nissan Frontier
How to Replace the Outside Rearview Mirror on a Nissan Frontier
Nissan Frontier (1997-2021 / D40) To replace the outside rearview mirror on a Nissan Frontier, you must completely remove the corresponding door panel. Start by detaching the cover th…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos