Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlight Bulb on the Nissan Magnite

Model: Nissan Magnite MK 1, DD0 - Years: 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Headlight bulb

Video tutorial

In this video tutorial, you will learn how to remove and replace the headlight bulb on the Nissan Magnite by following these simple and quick steps. First, open the hood of your car and start unscrewing all the mounting screws found on the upper and lower parts of the front bumper, also removing the plastic clips; unscrew the additional screws located on both sides of the front wheel wells, as shown in the video.

At this point, remove the front bumper; unscrew the headlight screws and disconnect the electrical connectors of the bulbs. Replace the low beam bulb with the new one, ensuring it has the same fitting!


Updated on 23 June 2026 by ScegliAuto


Related tutorials

How to Replace the Headlight Bulbs on the Nissan Magnite
How to Replace the Headlight Bulbs on the Nissan Magnite
Nissan Magnite (2020-2026 / MK 1, DD0) If you plan to customize and install LED bulbs on this vehicle model, you will find instructions on how to proceed in the description below, and you …
How to Replace the Radio in a Nissan Magnite
How to Replace the Radio in a Nissan Magnite
Nissan Magnite (2020-2026 / MK 1, DD0) To replace the radio in a Nissan Magnite, use a tool to pry off the trim that surrounds the radio and runs along the dashboard. Once this trim is rem…
How to Replace the Key Fob Battery of the Nissan Magnite?
How to Replace the Key Fob Battery of the Nissan Magnite?
Nissan Magnite (2020-2026 / MK 1, DD0) In this tutorial, you will see how to replace the key fob battery of the Nissan Magnite, a very simple and quick operation. To do this, you will need…

Other guides you may be interested in

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos