Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on Nissan Almera Versa

Model: Nissan Almera Versa N17 - Years 2012-2019
Part: Warning light – error code

In this video tutorial, you will see how to reset the service light on a Nissan Almera Versa: the first thing to do is perform maintenance, such as changing the engine oil and filters. Next, get in the vehicle, engage the parking brake, and turn on the ignition without starting the engine; make sure all the warning lights are illuminated and wait three seconds. Now, press the accelerator pedal five times (five times within five seconds), then count to seven seconds and hold the accelerator pedal down for about 14 seconds. The light should start flashing; when it does, release the accelerator and turn off the ignition. Then turn the ignition back on. Reset complete.

Updated on 4 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Where to Find the Main Fuse Box of the 2019 Nissan Almera Versa
Where to Find the Main Fuse Box of the 2019 Nissan Almera Versa
Nissan Almera Versa (2012-2019 / N17) Your 2019 Nissan Almera Versa has two distinct fuse boxes, but in this guide, we will discover where the main one is located. This box contains a lar…
How to Reset the Radio in a 2022 Nissan Versa
How to Reset the Radio in a 2022 Nissan Versa
Nissan Almera Versa (2019-2026 / N18) Resetting the factory settings of the radio in the 2022 Nissan Versa is a very simple operation. Today, with the help of this short video tutorial, y…
How to Replace the Heater in a Nissan Almera Versa
How to Replace the Heater in a Nissan Almera Versa
Nissan Almera Versa (2006-2012 / C11) In this video, check the heater in a Nissan Almera Versa to remove the control cables. Look at the small clips inside; pull out the cables carefully …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos