Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Cabin Fan in a Nissan Rogue?

Model: Nissan Rogue T32 - Years 2014-2020
Part: Blower motor

In this tutorial, you will see how to remove the cabin fan in a Nissan Rogue. First, remove the right dashboard cover, then open the glove compartment, disconnect its damper, and take it out of its housing. Next, remove the panel located at the joint between the tunnel and the dashboard, extract the climate control module and the radio. Finally, to access the fan, you will need to remove the right side of the dashboard. Once done, you can unscrew the fan mounting screws, take it out, and install the replacement.

Updated on 16 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Fan Resistor on the Nissan Rogue
How to Replace the Cabin Fan Resistor on the Nissan Rogue
Nissan Rogue (2014-2020 / T32) To replace the cabin fan resistor on the Nissan Rogue, you need to completely remove the plastic panel located behind the pedal area, also unscrewing…
How do you replace the cabin fan of the Nissan Rogue?
How do you replace the cabin fan of the Nissan Rogue?
Nissan Rogue (2014-2020 / T32) It will be possible to replace the cabin fan of the Nissan Rogue by opening the glove compartment located on the passenger side: once it has been ope…
How to Replace the Cabin Fan in the Nissan Rogue
How to Replace the Cabin Fan in the Nissan Rogue
Nissan Rogue (2008-2015 / S35) In this brief guide, follow the step-by-step instructions to remove and replace the cabin fan motor in the Nissan Rogue. First, get inside the vehicl…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos