Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Navara
    4. : How to reset the service light on the Nissan Navara D22.

Nissan Navara - Video tutorial

Model: Nissan Navara D22 - Years 1997-2004
Part: Instrument cluster
Operation: How to reset the service light on the Nissan Navara D22.

In this new guide dedicated to your Nissan Navara D22 (year 1997-2004), we will discover the various steps to follow if you want to manually reset the service light. First, enter the car and start the following procedure with the dashboard completely off. Then, insert the key and turn on the dashboard, after which hold down the button located below the speedometer. At this point, the display will start flashing for a few seconds. As soon as it stops, release the button and the manual reset of the light is complete.


Posted on 11 April 2023 by ScegliAuto

    Frequently Asked Questions

    • Navara 2014-2023 - How to reset the Adblue warning light on Nissan Navara? Read Answer
    • Navara 2014-2023 - What are the problems with the Nissan Navara instrument cluster? Read Answer
    • Navara 2005-2015 - What problems have been found on the Nissan Navara instrument cluster? Read Answer
    • Navara 2014-2023 - How to reset the service light on the Nissan Navara? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos