Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Fan Resistor on the Nissan Rogue

Model: Nissan Rogue T32 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Blower motor

See other generations:
Video tutorial

To replace the cabin fan resistor on the Nissan Rogue, you need to completely remove the plastic panel located behind the pedal area, also unscrewing the bolts that secure the pedals to their housing. Once these components are removed, you will have access to the inside of the dashboard: on the right, you will find the resistor, which should simply be pulled out and replaced with a new one. After the replacement, reinstall all the components that were previously removed.


Updated on 28 July 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Fan in the Nissan Rogue
How to Replace the Cabin Fan in the Nissan Rogue
Nissan Rogue (2008-2015 / S35) In this brief guide, follow the step-by-step instructions to remove and replace the cabin fan motor in the Nissan Rogue. First, get inside the vehicl…
How do you replace the cabin fan of the Nissan Rogue?
How do you replace the cabin fan of the Nissan Rogue?
Nissan Rogue (2014-2020 / T32) It will be possible to replace the cabin fan of the Nissan Rogue by opening the glove compartment located on the passenger side: once it has been ope…
Where are the cabin fan fuses located in the Nissan Rogue?
Where are the cabin fan fuses located in the Nissan Rogue?
Nissan Rogue (2008-2015 / S35) In this video, you can see which fuses control the cabin fan in the Nissan Rogue, specifically the first components to check in case of malfunction. …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos