Do it yourself
| ||||
|
Nissan Qashqai - Video tutorial
Model: Nissan Qashqai
J10
- Years 2006-2014 If you own a first-generation Nissan Qashqai (year 2006-2014) and want to manually reset the service light that appears on your instrument panel, all you have to do is carefully follow the instructions described in our new guide. First, enter the car and reach the driver's seat. Close all the doors and make sure the panel is off. Then, press and hold the button located below the speedometer and simultaneously start the panel. Wait a few moments and finally release the button as soon as the panel stops flashing.
Posted on 15 October 2023 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow to program the remote control of the Citroen C3?To program the remote control of the Citroen C3 there is no need to use special instruments. To begin with, we enter the passenger compartment of our car from the driver's side and, after closing the windows and doors, you can insert the key and turn on the ignition (but not the engine!). At this point, the top button on the remote control must be pressed for at least 3 seconds. After these few seconds, we must turn off the ignition, remove the key and press the last button on the remote control for at least three seconds. We just programmed our remote! by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.026
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |