Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Micra
    4. : Replacement of the Nissan Micra's parking light bulb.

Nissan Micra - Video tutorial

Model: Nissan Micra K13 - Years 2010-2017
Part: Headlight bulb
Operation: Replacement of the Nissan Micra's parking light bulb.

When the position light bulb of the Nissan Micra burns out, we need to replace it as soon as possible, for our safety and to avoid penalties. We open the hood of the engine compartment and position ourselves in front of the headlight where the bulb needs to be replaced. We need to reach the bulb holder located at the bottom and rotate it in order to remove it, but due to the tight spaces, the operation is not very immediate. Once the bulb holder is extracted, we can remove the entire bulb and replace it with a new one. It is advisable not to touch the bulb with bare fingers, it is better to use gloves or a cloth. We position the bulb holder and lock it by rotating it.


Posted on 1 January 2024 by ScegliAuto



How to change the parking light bulb on Nissan Micra k12??
Nissan Micra (2002-2010 / K12) Position lights are part of the eight mandatory lights on every car. When one of them burns out, it is important to know how to change it to put an e
How do you replace the rear headlight bulb of the Nissan Micra?
Nissan Micra (2017-2024 / K14) To replace the rear light bulb of the Nissan Micra, you need to open the rear hatch of the car so that you can access the screw that holds the light
How to replace the rear light bulb on a Nissan Micra
Nissan Micra (2002-2010 / K12) Before we can start, we will have to go to open the tailgate of the luggage compartment of our Nissan Micra. So let's start by unscrewing and removin

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos