Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Nissan
  4. :
  5. Qashqai
  6. : What does the "water in the filter" warning light mean in the Nissan Qashqai?

Nissan Qashqai - Video tutorial

Model: Nissan Qashqai J11 - Years 2014-2022
Part: Diesel filter
Operation: What does the "water in the filter" warning light mean in the Nissan Qashqai?

In this video we see that if the "water in filter" light comes on after replacing the diesel filter, the reason could be that we have installed the filter with the wrong electronics. In fact, there are two different types of filters that are identical in terms of the filtering part, but differ in terms of electronics, which - depending on the model - also changes color, being black for one and white for the other. If we want to use the same filter, we can reuse the electronics from the old filter, and the youtuber shows us how to do it: we remove the closing spring and lever it out to remove the electronic part, we take the new gasket and put back the electronic part of the old filter, which we will mount on the new filter. This way the error will be eliminated.


Posted on 22 February 2024 by ScegliAuto

    Frequently Asked Questions

    • Qashqai 2006-2014 - How much does it cost to replace the diesel filter in the Nissan Qashqai 1.5 DCI? Read Answer
    • Qashqai 2006-2014 - How much does the diesel filter cost in the Nissan Qashqai? Read Answer
    • Qashqai 2014-2022 - Why did the lamp showing an ampoule come on in the Nissan Qashqai? Read Answer
    • Qashqai 2014-2022 - Diesel filter lease on Nissan Qashqai? Read Answer
    • Qashqai 2006-2014 - Where is the Nissan Qashqai diesel filter located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos