Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Disable the Factory Alarm on a 2004 Nissan Altima

Model: Nissan Altima L31 - Years: 2002, 2003, 2004, 2005, 2006
Part: Checks and maintenance

See other generations:
Video tutorial

In this video, see how to disable the factory alarm on a 2004 Nissan Altima. This is a very simple operation that you can perform directly from the fuse box located in the cabin, under the dashboard, between the steering wheel and the driver's door.

It is fuse number 10, next to the hook. Just remove it, and the alarm will no longer be a problem.

It seems that the immobilizer on this vehicle causes more issues than benefits, and the practice of removing this fuse to eliminate the alarm annoyance is quite common. Therefore, for those who are not aware, we would like to point this out.


Updated on 20 September 2026 by ScegliAuto


Related tutorials

Where to Find the Fuse Box of the 2004 Nissan Altima
Where to Find the Fuse Box of the 2004 Nissan Altima
Nissan Altima (2002-2006 / L31) If you haven't been able to locate the box that contains all the various fuses in your 2004 Nissan Altima, don't worry because below we will provide …
How to Reset the Onboard Computer in a Nissan Altima?
How to Reset the Onboard Computer in a Nissan Altima?
Nissan Altima (2013-2018 / L33) In this tutorial, you will see how to reset the onboard computer in a Nissan Altima, a very simple and quick operation that can be performed as a tro…
How to deactivate the audible seat belt warning on Nissan Altima
How to deactivate the audible seat belt warning on Nissan Altima
Nissan Altima (2018-2026 / L34) In this video we can see how to deactivate the annoying seat belt chime on a Nissan Altima: we need to look on the inside of the seat, where we see a…

Other guides you may be interested in

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos