Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the front brake pads of the Nissan Qashqai.

Model: Nissan Qashqai J11 - Years 2014-2022
Part: Brake pads

Let's see how to proceed to replace the front brake pads of the Nissan Qashqai. We open the hood and unscrew the cap of the brake fluid reservoir, remove any wheel nut covers on the front wheel and loosen the nuts, lift the car with a jack and finish unscrewing the bolts, remove the wheel. Rotate the disc outwards to work better, with a 15mm key loosen the upper bolt of the caliper and completely unscrew the lower one, with a sturdy screwdriver remove the pads from the disc, rotate the caliper upwards and remove the old pads. Take the new pads, put the anti-noise plate and wear indicator, clean the seat with a compressed air jet and properly insert the new pads into their seat. Position the caliper and tighten the two bolts, straighten the disc, remount the wheel, tightening its nuts, lower the car and finish tightening the nuts. Repeat the same operations for the other wheel and finally close the brake fluid reservoir.

Posted on 29 June 2024 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front brake pads of the Nissan Qashqai
How to replace the front brake pads of the Nissan Qashqai
Nissan Qashqai (2006-2014 / J10) Let's see the instructions that will allow us to disassemble and replace the front brake pads of the Nissan Qashqai. First of all, lift the car and s…
How to Replace the Rear Brake Pads on a Nissan Qashqai
How to Replace the Rear Brake Pads on a Nissan Qashqai
Nissan Qashqai (2014-2022 / J11) Before you can start, lift the rear of your Nissan Qashqai. Begin by removing the rear wheel by unscrewing the fixing bolts. Next, unscrew and remove…
Replacing Front Brake Discs and Pads on Nissan Qashqai
Replacing Front Brake Discs and Pads on Nissan Qashqai
Nissan Qashqai (2006-2014 / J10) In this video tutorial, you will learn how to remove the brake discs and pads from a Nissan Qashqai. First, lift the vehicle with a jack and use a sp…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos