Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Front Brake Discs and Pads on Nissan Qashqai

Model: Nissan Qashqai J10 - Years 2006-2014
Part: Brake rotors

In this video tutorial, you will learn how to remove the brake discs and pads from a Nissan Qashqai. First, lift the vehicle with a jack and use a spanner to remove all the wheel bolts to take the wheel off. Then, using a 14 mm socket, remove the rear bolts of the brake caliper to detach it: then remove the old pads. At this point, remove the support bracket by unscrewing the other two bolts and take off the brake disc by applying pressure or pulling it towards you! Refit the new disc and pads!

Updated on 21 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the front brake pads of the Nissan Qashqai?
How do you replace the front brake pads of the Nissan Qashqai?
Nissan Qashqai (2006-2014 / J10) It will be possible to replace the front brake pads of the Nissan Qashqai by lifting the car, so that the corresponding front wheel is not in contact…
Replacing the Rear Brake Pads on a Nissan Qashqai
Replacing the Rear Brake Pads on a Nissan Qashqai
Nissan Qashqai (2014-2022 / J11) Lift the bonnet and place the support rod in position. Loosen the wheel bolts of the affected wheel, then lift the car and fully unscrew them to remo…
Replacing the Rear Brake Pads on a Nissan Qashqai 1
Replacing the Rear Brake Pads on a Nissan Qashqai 1
Nissan Qashqai (2006-2014 / J10) Today, this tutorial video will show you how to remove and replace the rear brake pads and discs on the first generation Nissan Qashqai J10. First, l…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos