Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Standard Radio in the Nissan Qashqai

Model: Nissan Qashqai J10 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Car stereo

See other generations:
Video tutorial

Today's video tutorial will show you the main instructions on how to dismantle and replace the standard radio in the Nissan Qashqai. First, get inside the vehicle and start by removing the plastic cover located on the side of the radio, prying it off from the sides; then unscrew the fixing screws found on the sides, as shown in the video.

At this point, disconnect the connectors of the radio to remove it and replace it with a compatible new one; install the new radio and perform the initialisation, following the video tutorial to the end!


Updated on 13 October 2026 by ScegliAuto


Related tutorials

How to Reset the Radio on the Nissan Qashqai?
How to Reset the Radio on the Nissan Qashqai?
Nissan Qashqai (2014-2022 / J11) In this video, you will discover how to reset the factory-installed radio on the Nissan Qashqai if needed due to a lock of all available functions. F…
How to Replace the Rear Brake Pads on a Nissan Qashqai
How to Replace the Rear Brake Pads on a Nissan Qashqai
Nissan Qashqai (2014-2022 / J11) Before you can start, lift the rear of your Nissan Qashqai. Begin by removing the rear wheel by unscrewing the fixing bolts. Next, unscrew and remove…
How to Retrieve the Radio Code on a Nissan Qashqai?
How to Retrieve the Radio Code on a Nissan Qashqai?
Nissan Qashqai (2014-2022 / J11) In this short video, the procedure to retrieve the radio code for your Nissan Qashqai is shown. Intentionally enter a code of 4 random numbers three …

    Frequently Asked Questions

    • Qashqai 2014-2022 - How to fix DAB radio problems on Nissan Qashqai? Read answer
    • Qashqai 2006-2014 - Why is the radio of the Nissan Qashqai not working? Read answer

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos