Do it yourself
Frequently asked questions about cars and motorcycles

What Does the "Key System Fault" Message Mean on the Nissan Qashqai?

Model: Nissan Qashqai J11 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Checks and maintenance

See other generations:
Video tutorial

When the "Key System Fault" message appears on the instrument panel of the Nissan Qashqai, it means that the ignition key has been inserted but anomalies have been detected: to remove the message and start the car, follow the instructions shown on the instrument panel.

Press the brake pedal and then grasp the steering wheel: it must be turned counter-clockwise and then clockwise.

The message will then disappear from the instrument panel, allowing you to turn the key to start the ignition.


Updated on 16 October 2026 by ScegliAuto


Related tutorials

Nissan Qashqai (2014-2022 / J11) In this brief guide, you will find instructions to activate and deactivate the I-Key mode (as well as the keyless system) on a Nissan Qashqai. First,…
Nissan Qashqai (2014-2022 / J11) To reset the service indicator on the Nissan Qashqai, start by turning on the ignition and then the engine; point the left steering wheel control upw…
Nissan Qashqai (2014-2022 / J11) To connect your phone via Bluetooth to a Nissan Qashqai, start by turning on the car radio, enable Bluetooth on your phone, and search for devices on…

Other guides you may be interested in

    Frequently Asked Questions

    • Qashqai 2014-2022 - Have there been any issues reported with the 2015 Nissan Qashqai? Read answer
    • Qashqai 2006-2014 - Where is the Nissan Qashqai indicator relay located? Read answer
    • Qashqai 2006-2014 - Why are the Nissan Qashqai steering wheel buttons not working? Read answer

How to Extract the Spare Wheel from a Mercedes Vito

The spare wheel of a Mercedes Vito is located underneath the vehicle, just below the rear boot. This video demonstrates how to extract the wheel from its compartment. First, open the boot and locate the tools provided with the vehicle to release the wheel; these can be found in a compartment on the right side of the boot. As shown in the video, use the supplied screwdriver to remove the cover cap from the hole where you will insert the socket spanner; this hole is located beneath the rubber seal above the rear bumper. Insert the spanner and attach the extension to allow you to turn it and lower the wheel from under the floor. Finally, detach the pin that allowed the wheel to lower and proceed to extract it from under the vehicle.

Watch the video!


by ScegliAuto

More videos