Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Clock Display Light on the Opel Corsa D

Model: Vauxhall Corsa Corsa D - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Instrument cluster

See other generations:
Video tutorial

Watch this video to learn how to change the bulb for the clock display on the dashboard of the Opel Corsa D. You need to remove the cover where the display is mounted, which contains the bulb you wish to change, but do not break it apart. As always, when working on electrical parts, it is advisable to disconnect the battery first.

Once you have removed the cover from its housing, simply turn it, and with the help of a screwdriver, dismantle the rear part to access the bulb for replacement.


Updated on 29 October 2026 by ScegliAuto


Related tutorials

How to reset the "Service" light on an Opel Corsa?
How to reset the "Service" light on an Opel Corsa?
Vauxhall Corsa (2000-2006 / Corsa C) To reset the "Service" light on an Opel Corsa, start with the ignition off. Press the button located under the instrument panel, near the odometer di…
How to Reset the Tyre Warning Light on the 2021 Opel Corsa F
How to Reset the Tyre Warning Light on the 2021 Opel Corsa F
Vauxhall Corsa (2019-2026 / Corsa F) When the tyre warning light on the instrument cluster of your 2021 Opel Corsa F keeps illuminating despite no punctures or incorrect pressures, you n…
Replacing the Dashboard Display Bulb on an Opel Corsa
Replacing the Dashboard Display Bulb on an Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) Below are the instructions for removing and replacing the dashboard display bulb on an Opel Corsa. First, get inside the vehicle and start by removin…

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos