Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Tweeters on an Opel Corsa B

Model: Vauxhall Corsa Corsa B - Years: 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000
Part: Speaker

See other generations:
Video tutorial

In this video, you can see how to replace the tweeters on the Opel Corsa version B. The tweeters are located near the internal door handle on both sides, so you will need to remove the handle along with the trim. Remove the cover and unscrew the screws holding it in place.

In this case, it was necessary to slightly enlarge the hole to fit the new tweeters. Connect the wires to the existing ones, securing them well with tape to avoid future issues with moisture.

Refit the internal handle cover along with the handle, which you will then secure back in place, and then you can enjoy the result.


Updated on 5 November 2026 by ScegliAuto


Related tutorials

Replacing the Cabin Air Filter on the Opel Corsa D
Replacing the Cabin Air Filter on the Opel Corsa D
Vauxhall Corsa (2006-2014 / Corsa D) To maintain the efficiency of the filter that prevents dirt from entering the ventilation system of the Opel Corsa, replace the filter element period…
How to Replace the Front Indicator Bulb on an Opel Corsa
How to Replace the Front Indicator Bulb on an Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) Before you can begin, open the bonnet of your Opel Corsa. Start by turning the base of the blown bulb anti-clockwise to remove it from its housing. N…
Where to Find the Fuse Box of the Opel Corsa C
Vauxhall Corsa (2000-2006 / Corsa C) In this guide for all of you who own an Opel Corsa C, follow these steps to locate the fuse box. First, fully lift the bonnet of your Opel Corsa C, t…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos