Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fitting Additional ECU Chip Tuning Kit

Model: Vauxhall Antara MK 1 - Years 2006-2015
Part: Accessory kit

To improve the performance of the diesel engine, you can install this ECU; first, obtain the kit for the vehicle in question. Remove the engine cover, disconnect the connector of the installed ECU using a tool, as the ECU is located in a hard-to-reach place. Add the extension cable provided in the kit to the cable. After connecting the new additional ECU to the supplied cable, connect one end of this cable to the ECU connector and the other end to the connector that went to the installed ECU to create a Y connection. Position the new ECU in a suitable location and secure it with plastic ties. Calibration may need to be adjusted if necessary.

Updated on 3 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Cabin Air Filter
Replacing the Cabin Air Filter
Vauxhall Antara (2006-2015 / MK 1) The cabin air filter is located on the passenger side, under the glove compartment: to replace the filter, you must remove the glove compartment itse…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos