Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the side indicator bulb on the Opel Adam

Model: Vauxhall Adam MK 1 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Light bulb

Video tutorial

In this video we can see how to replace the side indicator bulb of the Opel Adam: it is really easy because we do not need any tools to remove the side lens, just two good strong fingers to pry it off, pushing forward at the same time to remove the repeater from its housing.

We remove the lens by turning it counterclockwise and thus we have freed the bulb, which will remain attached to its electrical connector.

It is a W5W bulb, which is easily found; we remove it from its base and replace it, being careful not to make it disappear into the bodywork. We put the lens back over the bulb and snap it back into place.

Operation completed.


Posted on 9 December 2024 by ScegliAuto


Related tutorials

How to replace the engine air filter of the Opel Adam
How to replace the engine air filter of the Opel Adam
Vauxhall Adam (2013-2019 / MK 1) If you want to replace the engine air filter of your Opel Adam by yourself, just follow the steps described below. First of all, you need to get a To…
How to replace the cabin air filter of the Opel Adam
How to replace the cabin air filter of the Opel Adam
Vauxhall Adam (2013-2019 / MK 1) These short and simple steps will show us how to replace the cabin air filter or the pollen filter of the Opel Adam. First, we open the front passeng…
How to replace the rear headlight bulb of the Opel Adam
How to replace the rear headlight bulb of the Opel Adam
Vauxhall Adam (2013-2019 / MK 1) Replacing the rear headlight bulb on an Opel Adam car is a simple and quick operation that can be done independently. First, open the trunk of the ve…

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos