Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the pollen filter of an Opel Mokka

Model: Vauxhall Mokka Mokka A - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Cabin air filter

See other generations:
Video tutorial

In this very short tutorial today, we are shown how to replace the pollen filter on an Opel Mokka, first generation model. Let's start the procedure by removing the glove compartment on the passenger side, to do this we need to press the ends of the glove compartment inwards and then lower it as shown in the video, then detach the filter cover, located just behind the compartment, and remove the old pollen filter, finally insert a new filter making sure to insert it in the right direction and then close everything and finish the job.


Posted on 15 December 2024 by ScegliAuto


Related tutorials

How to Change the Cabin Filter on an Opel Mokka
How to Change the Cabin Filter on an Opel Mokka
Vauxhall Mokka (2012-2019 / Mokka A) Learn how to change the cabin filter fitted in the Opel Mokka. Open the glove compartment and disconnect the plastic guides (located on the sides of …
How to Remove the Cabin Filter on Opel Mokka
How to Remove the Cabin Filter on Opel Mokka
Vauxhall Mokka (2012-2019 / Mokka A) Let’s see how to remove the cabin filter on Opel Mokka. Open the glove compartment and unclip the plastic guides (located at the sides of the drawer)…
How to change the cabin air filter of the 2018 Opel Mokka
How to change the cabin air filter of the 2018 Opel Mokka
Vauxhall Mokka (2012-2019 / Mokka A) If you need to replace the cabin air filter in your 2018 Opel Mokka A by yourself, just follow the steps described in the following guide. First of a…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos