Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Lower the Rear Seats on an Opel Karl

Model: Vauxhall Karl MK 1 - Years 2015-2019
Part: Seat

To lower the rear seats on an Opel Karl for extra space in the cabin, first press the lever located on the seat back, allowing the seat back to fall forward and rest on the seat base. Repeat the same steps for the other rear seats next to it. Remove the headrests from the rear seats to ensure the seat back fits behind the front seat back. Finally, remove the rear panel located in the boot.

Updated on 1 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Pressure Light on an Opel Karl
How to Reset the Tyre Pressure Light on an Opel Karl
Vauxhall Karl (2015-2019 / MK 1) Watch this video to learn how to reset the tyre pressure light on an Opel Karl: use the lever located on the left side of the steering wheel: first, …
How to replace the external rearview mirror of the Opel Karl
How to replace the external rearview mirror of the Opel Karl
Vauxhall Karl (2015-2019 / MK 1) In this new guide dedicated to those of you who own an Opel Karl, we will explain step by step how you can quickly and safely replace the external re…
How to Remove the Rear Door Panel on Opel Karl
How to Remove the Rear Door Panel on Opel Karl
Vauxhall Karl (2015-2019 / MK 1) In today's video, you will see how to remove the rear door panel on the Opel Karl, following the instructions below. First, open the rear door and st…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos