Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Stabiliser Bar on an Opel Corsa

Model: Vauxhall Corsa Corsa C - Years 2000-2006
Part: Anti-roll bar

In this video, see how to remove the stabiliser bar on an Opel Corsa. Here’s the procedure: position your car on a column lift, raise it to a comfortable height for access; unscrew the wheel nuts with a socket wrench or air drill and remove the wheel. Then, start unscrewing the bolts of the wishbone with a socket wrench. Unscrew the bolts located under the plate that holds the stabiliser bar, and remove it from its location. Fit the new stabiliser bar, then begin to install it with all the attached bolts. Finally, refit the wheel with the nuts.

Updated on 1 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Vauxhall Corsa (2006-2014 / Corsa D) This guide shows you how to remove and replace the stabiliser bar on the Opel Corsa, following the instructions below. First, lift the vehicle and re…
Vauxhall Corsa (1993-2000 / Corsa B) Are the spark plugs on your Opel Corsa damaged? Here’s how to remove them. Lift the front bonnet and secure it. Remove the engine soundproofing panel…
Vauxhall Corsa (2006-2014 / Corsa D) First, remove the protective caps from the wheel fastening bolts on which you will carry out the repair, loosen the bolts before lifting the vehicle,…

How to Replace the Diesel Filter of the Peugeot 3008 1.5 BlueHDI

Briefly, we will see the main instructions for dismantling and replacing the diesel filter of the Peugeot 3008 1.5 BlueHDI. First, locate the diesel filter under the vehicle, so it will be necessary to lift it; then disconnect the electrical connector and the fuel lines from the filter, unscrewing the side screws to remove the cartridge, as shown in the video. At this point, replace the diesel filter with the new one, as well as with the original one; then reconnect the pipes and the electrical connector, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos