Do it yourself
Frequently asked questions about cars and motorcycles

How to disassemble the rear headlight of the Opel Corsa

Model: Vauxhall Corsa Corsa D - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Tail light

See other generations:
Video tutorial

To successfully disassemble one of the two rear headlights of your Opel Corsa D on your own, just follow the steps described in the following guide. Before starting the actual procedure, we remind you that for safety reasons the car must remain completely off for the entire duration of the intervention.

So go to the rear and lift the hood, then remove the protective cover located on the side of the trunk. At this point, unscrew the safety clips and then remove the rear headlight, being careful to disconnect the electrical cable connected to it.


Posted on 1 March 2025 by ScegliAuto


Related tutorials

Vauxhall Corsa (2006-2014 / Corsa D) Remove the rear headlight on an Opel Corsa? Remove the rear headlight with all its components. Open the boot, then remove the cover cap located at th…
Vauxhall Corsa (2014-2019 / Corsa E) Are the rear lamp bulbs blown? Here's how to remove them from inside the lamp. Lift the tailgate of the Opel Corsa, identify the parts to disassemble…
Vauxhall Corsa (2006-2014 / Corsa D) How do you remove the rear light from an Opel Corsa? Lift the boot to access the plastic covers in the luggage compartment. Remove the cover from the…

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos