Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Lamp Bulb on Opel Corsa

Model: Vauxhall Corsa Corsa E - Years 2014-2019
Part: Tail light bulb

Are the rear lamp bulbs blown? Here's how to remove them from inside the lamp. Lift the tailgate of the Opel Corsa, identify the parts to disassemble. Remove the cover on the side of the boot, unscrew the securing nuts above the bodywork. Once the securing nuts are removed, take the lamp out from the bodywork (pull the lamp out). Disconnect the electrical connectors once the lamp is extracted. Replace the damaged bulbs inside the lamp (same parts and voltage). Refit the rear lamp with associated parts and test its operation.

Updated on 2 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Headlamp Bulb on the Opel Corsa E?
How to Replace the Headlamp Bulb on the Opel Corsa E?
Vauxhall Corsa (2014-2019 / Corsa E) To replace the bulb on the Opel Corsa E, open the bonnet to access the internal part of the headlamp corresponding to the bulb to be replaced. Once t…
How to Replace the Front Headlamp Bulb on the Opel Corsa D
How to Replace the Front Headlamp Bulb on the Opel Corsa D
Vauxhall Corsa (2006-2014 / Corsa D) To replace the front headlamp bulb on the Opel Corsa D, open the bonnet and remove the air filter box. Disconnect it from the relevant hose and take …
How to Replace the Front Headlight Bulb on the Opel Corsa D
How to Replace the Front Headlight Bulb on the Opel Corsa D
Vauxhall Corsa (2006-2014 / Corsa D) To replace the front headlight bulb on your Opel Corsa D, follow the instructions in this guide. The operation varies slightly depending on whether i…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos