Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to put the wiper blades of the Opel Corsa F in maintenance mode

Model: Vauxhall Corsa Corsa F - Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Windshield wipers

See other generations:
Video tutorial

Let's see how to put the wiper blades of the Opel Corsa F in maintenance mode: modern cars do not have the possibility to move the blades manually, so if we want to change the blades or even just the rubber part of the blades themselves, we cannot do it unless we know how to put the blades in the right position.

We must turn on the dashboard, then immediately turn it off. We must then pull down the wiper lever, and in this way the blades will be positioned vertically on the windshield, so that we can perform all the service operations.


Posted on 11 May 2025 by ScegliAuto


Related tutorials

Removing Wiper Blade on Opel Corsa
Removing Wiper Blade on Opel Corsa
Vauxhall Corsa (2000-2006 / Corsa C) Removing the rear wiper blade from an Opel Corsa? Remove and replace the damaged blade. Grasp the rear wiper blade with your hands, gently pull as sh…
How to replace the front windshield wipers of the Opel Corsa.
How to replace the front windshield wipers of the Opel Corsa.
Vauxhall Corsa (2000-2006 / Corsa C) The following steps will allow us to disassemble and replace the front windshield wipers of the Opel Corsa. First, let's move to the front of the veh…
Replacing the Wiper Blades on the Opel Corsa D
Replacing the Wiper Blades on the Opel Corsa D
Vauxhall Corsa (2006-2014 / Corsa D) In today's tutorial, you will learn how to remove and replace the front wiper blades on the Opel Corsa D in simple and quick steps. First, lift the f…

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos