Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the tire pressure light on the Opel Mokka?

Model: Vauxhall Mokka Mokka A - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Tire pressure warning light

See other generations:
Video tutorial

To reset the tire pressure warning light of the Opel Mokka, you need to inflate the tires until they reach the recommended pressure value: this value will be indicated on the sticker attached to the driver's door pillar. Once the inflation is complete, you can go inside the cabin and turn on the ignition: this way you can verify that the warning light has disappeared completely.

If the light is still on, it may be necessary to drive for a few kilometers to make the light disappear from the display.


Posted on 23 May 2025 by ScegliAuto


Related tutorials

How to Reset the Tyre Pressure Warning Light on the Opel Mokka?
How to Reset the Tyre Pressure Warning Light on the Opel Mokka?
Vauxhall Mokka (2012-2019 / Mokka A) To reset the tyre pressure warning light on the Opel Mokka, open the driver's door and check the recommended inflation pressure values on the sticker…
How to Recalibrate the Tyre Pressure Sensors on an Opel Mokka
How to Recalibrate the Tyre Pressure Sensors on an Opel Mokka
Vauxhall Mokka (2012-2019 / Mokka A) In this brief guide, we will provide instructions to allow you to recalibrate the tyre pressure sensors on the Opel Mokka. Before resetting the TPMS …
How to reset the tyre pressure light on the Opel Mokka?
How to reset the tyre pressure light on the Opel Mokka?
Vauxhall Mokka (2020-2026 / Mokka B) To reset the tyre pressure light on the Opel Mokka, turn on the ignition by inserting the key into the corresponding ignition switch: when the dashbo…

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos