Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the license plate lights bulbs in the Opel Zafira?

Model: Vauxhall Zafira MK 2, A05, Zafira B - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: License plate light

See other generations:
Video tutorial

In this tutorial we can see how to replace the license plate lights bulbs in the Opel Zafira, a very simple and fast operation. First of all, make sure that the key is not inserted, so that you can operate safely, then locate the slot on the inner edge of the light in question and, using a flat tip screwdriver, unhook it by levering.

Next, remove the bulb from the housing, disconnect it and connect the replacement. At this point, all that remains is to reassemble everything and repeat the operation for the opposite light, if necessary.


Posted on 18 July 2025 by ScegliAuto


Related tutorials

How to Remove the Chrome Trim from the Tailgate of an Opel Zafira
How to Remove the Chrome Trim from the Tailgate of an Opel Zafira
Vauxhall Zafira (2005-2011 / MK 2, A05, Zafira B) In this video, learn how to remove the chrome trim (where the number plate light is located) from the rear tailgate of an Opel Zafira. First, open th…
Replacing the Number Plate Bulb of the Opel Zafira B
Replacing the Number Plate Bulb of the Opel Zafira B
Vauxhall Zafira (2005-2011 / MK 2, A05, Zafira B) In this video, you will see how to replace the number plate light bulb of the Opel Zafira B if it burns out. You need to proceed with the replacement…
Replacement of the license plate lights of the Opel Zafira
Replacement of the license plate lights of the Opel Zafira
Vauxhall Zafira (1999-2005 / Zafira A, T98, MK 1) Today's instructions will show us how to disassemble and replace the license plate lights of the Opel Zafira, in simple and quick steps. First, let's…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos