Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the low beam headlight bulb of the Opel Meriva

Model: Vauxhall Meriva MK 1, Meriva A - Years 2003-2010
Part: Headlight bulb

Below we will see the instructions on how to disassemble and replace the low beam bulb of the front headlight of the Opel Meriva. First, open the hood of the car and start removing the plastic bulb protection cap, located behind the headlight group; then remove the bulb holder along with the bulb, as shown in the video. At this point, replace the low beam bulb with the new one, of the correct type and with the same attachment; reassemble the light and check its operation, replacing the other low beam bulb in the same way.

Posted on 28 July 2025 by ScegliAuto

This video is currently unavailable

Related tutorials

What does error code 18 indicate on the Opel Meriva?
What does error code 18 indicate on the Opel Meriva?
Vauxhall Meriva (2010-2017 / MK 2, Meriva B) The "error code 18" on an Opel Meriva model b vehicle indicates a malfunction in the right low beam headlight bulb. In these cases, it is necessary t…
How do you replace the front headlight bulb of the Opel Meriva?
How do you replace the front headlight bulb of the Opel Meriva?
Vauxhall Meriva (2010-2017 / MK 2, Meriva B) The replacement of the headlight bulb on the Opel Meriva is done by opening the hood, so that access to the components located inside the engine comp…
Opel Meriva headlight bulb replacement
Opel Meriva headlight bulb replacement
Vauxhall Meriva (2003-2010 / MK 1, Meriva A) Let's see below the steps necessary to disassemble and replace the low beam bulb of the front headlight of the Opel Meriva. First of all, we open the…

Other guides you may be interested in

How to Remove the Right Front Door Panel on an Opel Mokka

To remove the right front door panel on an Opel Mokka, follow these steps: disconnect the battery terminals located in the engine bay, then use a screwdriver to remove the screws from the upper door opening lever and the screws in the handle. Next, remove the covering plastic near the lever. Unscrew the remaining screws on the door panel and detach the retaining clips. Finally, pull the panel away with your hands and unclip it from the door (disconnect the power wiring and the release cable). Reassemble everything in reverse order.

Watch the video!


by ScegliAuto

More videos