Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Vauxhall
    3. :
  3. Meriva
    4. : How do you replace the front headlight bulb of the Opel Meriva?

Vauxhall Meriva - Video tutorial

Model: Vauxhall Meriva Meriva B, MK 2 - Years 2010-2017
Part: Headlight bulb
Operation: How do you replace the front headlight bulb of the Opel Meriva?

The replacement of the headlight bulb on the Opel Meriva is done by opening the hood, so that access to the components located inside the engine compartment can be obtained. Inside the headlight, a circular protective cover can be found, which must be removed in order to locate the underlying bulb. The bulb can now be disconnected from its connector and removed from its optical group, so that the new one can be connected: it can then be inserted into the optical group, closing everything with the cover.


Posted on 18 November 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Meriva 2010-2017 - What does code 21 indicate on a 2011 Opel Meriva? Read Answer
    • Meriva 2010-2017 - What does the message "code 20" indicate in the Opel Meriva? Read Answer
    • Meriva 2010-2017 - What does error code 18 indicate in the Opel Meriva? Read Answer
    • Meriva 2010-2017 - What does the message "Code 22" mean in the Opel Meriva? Read Answer
    • Meriva 2010-2017 - What does the message "Code 22" mean in the Opel Meriva? Read Answer
    • Meriva 2010-2017 - What does the "code 21" message mean in the Opel Meriva? Read Answer
    • Meriva 2010-2017 - How do I replace the position light bulb on the Opel Meriva EcoFlex 1.4? Read Answer
    • Meriva 2003-2010 - What does the Opel Meriva error code 22 mean? Read Answer
    • Meriva 2010-2017 - What does the message "Code 22" mean in the Opel Meriva? Read Answer
    • Meriva 2010-2017 - When does code 22 appear on the Opel Meriva? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos