Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Vauxhall
    3. :
  3. Meriva
    4. : How to replace the headlight bulb of the Opel Meriva

Vauxhall Meriva - Video tutorial

Model: Vauxhall Meriva MK 1, Meriva A - Years 2003-2010
Part: Headlight bulb
Operation: How to replace the headlight bulb of the Opel Meriva

Below are the step-by-step instructions that will allow us to disassemble and replace the headlight bulb of the Opel Meriva. First, we open the hood of the vehicle and start by removing the air filter box for the replacement of the left headlight bulb in the engine compartment; then we remove the bulb protection cap and disconnect the electrical connector, as shown in the video. At this point, we can remove the bulb from the headlight assembly, replacing it with the new one (with an H7 type connection); we make the electrical connection and reassemble the plastic cap!


Posted on 16 April 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Meriva 2010-2017 - What does code 21 indicate on a 2011 Opel Meriva? Read Answer
    • Meriva 2010-2017 - What does the message "code 20" indicate in the Opel Meriva? Read Answer
    • Meriva 2010-2017 - What does error code 18 indicate in the Opel Meriva? Read Answer
    • Meriva 2010-2017 - What does the message "Code 22" mean in the Opel Meriva? Read Answer
    • Meriva 2010-2017 - What does the message "Code 22" mean in the Opel Meriva? Read Answer
    • Meriva 2010-2017 - What does the "code 21" message mean in the Opel Meriva? Read Answer
    • Meriva 2010-2017 - How do I replace the position light bulb on the Opel Meriva EcoFlex 1.4? Read Answer
    • Meriva 2003-2010 - What does the Opel Meriva error code 22 mean? Read Answer
    • Meriva 2010-2017 - What does the message "Code 22" mean in the Opel Meriva? Read Answer
    • Meriva 2010-2017 - When does code 22 appear on the Opel Meriva? Read Answer

How to reset the oil warning light on the Alfa Romeo Giulietta

If you want to manually reset the oil change light on your Alfa Romeo Giulietta then this guide is all you need. You do not need any diagnostic tools and will be able to complete the whole procedure without any difficulty. First, go inside the car and make sure it is completely turned off. Then keep the accelerator pedal pressed and at the same time press the brake pedal six times consecutively. When finished, keep both pedals pressed and turn on the ignition. Press the brake pedal again six more times and keep both pedals depressed for approximately 50 seconds. Turn off the ignition. Release the brake pedal and hold the accelerator pedal for another 50 seconds to complete the procedure.

Watch the video!


by ScegliAuto

More videos