Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the rear headlight of the Opel Grandland X

Model: Vauxhall Grandland X MK 1 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Tail light

See other generations:
Video tutorial

To quickly and safely remove the rear light of your Opel Grandland X, you must carefully read all the steps described in the following guide and then apply them correctly. First of all, park the vehicle on a flat surface and turn it off completely.

Once you have done this, lift the rear hood and proceed to remove the small protective cover located on the side of the trunk. Immediately after, unscrew the bolt present and go back outside the car. Finally, pull the rear light towards you and disconnect the electrical cable.


Posted on 19 November 2025 by ScegliAuto


Related tutorials

How to Replace the Key Battery of an Opel Grandland X
How to Replace the Key Battery of an Opel Grandland X
Vauxhall Grandland X (2017-2024 / MK 1) Start by pressing and holding the button located on the back of the key for your Opel Grandland X. Next, extract the physical emergency key. Once don…
How to Remove the Rear Light from the Opel/Vauxhall Grandland-X
How to Remove the Rear Light from the Opel/Vauxhall Grandland-X
Vauxhall Grandland X (2024-2026 / MK 2) To remove the rear light on the Grandland X (2017-2024), open the boot and locate the access cover on the side corresponding to the light to be remov…
How to Activate and Deactivate the Position Lights on the Opel Grandland X
How to Activate and Deactivate the Position Lights on the Opel Grandland X
Vauxhall Grandland X (2017-2024 / MK 1) If you don't know how to activate and deactivate the position lights on your first-generation Opel Grandland X, don't worry as the steps to follow ar…

How to Set the Time in an Audi A4?

In this tutorial, you will see how to set the time in an Audi A4, a very simple and quick operation to perform after replacing the battery or when the time changes. First, insert the key and turn on the instrument cluster. Then, press the "SETUP" button located on the center console. Next, press the upper left arrow button, navigate to the "Time" option, and use the central knob to adjust the clock. Finally, set any necessary formats and save by returning to the main screen.

Watch the video!


by ScegliAuto

More videos