Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear headlight bulb of the Opel Combo 2018

Model: Vauxhall Combo MK 4, Combo D - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Tail light bulb

See other generations:
Video tutorial

If you want to replace the rear headlight bulb of your Opel Combo (year 2018) by yourself, just follow the procedure described in the following guide. First of all, purchase a new perfectly compatible bulb, then reach the rear part of the vehicle and open the tailgate.

Once you have done this, unscrew the two screws above and below the headlight and then remove the headlight itself by disconnecting the electrical connector. Finally, replace the faulty bulb with the new one and correctly reassemble the rear headlight of your Opel Combo.


Posted on 1 September 2025 by ScegliAuto


Related tutorials

How do you replace the rear headlight bulb of the Opel Combo?
How do you replace the rear headlight bulb of the Opel Combo?
Vauxhall Combo (2001-2011 / MK 3, Combo C) The replacement of the rear headlight bulb of the Opel Combo can be done by opening the rear hatch, so that it is possible to detach the inner side p…
How to replace the front headlight bulbs in the Opel Combo van?
How to replace the front headlight bulbs in the Opel Combo van?
Vauxhall Combo (2019-2026 / Combo E, MK 5) In this tutorial we can see how to replace the front headlight bulbs in the Opel Combo van, an extremely simple and quick operation. First of all, ma…
How to replace the EGR valve on the Opel Combo?
How to replace the EGR valve on the Opel Combo?
Vauxhall Combo (1994-2001 / MK 2, Combo B) To replace the EGR valve on the Opel Combo, open the bonnet to access the components in the engine compartment: at the rear of the engine block, you …

Other guides you may be interested in

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos