Do it yourself
Frequently asked questions about cars and motorcycles

How to remove the hard top of an Opel Frontera B

Model: Vauxhall Frontera Frontera B, MK 2 - Years 1998-2003
Part: Body

This is a procedure that is best done by two people: we remove everything from the cabin and disconnect the battery. Some hardtops have rear side windows that can be opened; these are the first things to remove. Then we unscrew the hinges and locking mechanisms from the inside. If there is an electrical connection, it is located in the rear hinge or at the front of the roof, near the driver's door; we disconnect the electrical connector for the third brake light, remove the side mounting bolts, at the top of the cargo area, and at the front, just above the windshield, where it is attached to the frame. With the help of our assistant, we ensure that all bolts have been removed and decide on a safe place to set it down securely. The roof should be lifted firmly, as the seals may be "stuck," but also gently to avoid damaging them. At the time of reassembly, they must be thoroughly cleaned and greased to maintain the seal.

Posted on 15 December 2025 by ScegliAuto

Video tutorial

Related tutorials

Vauxhall Frontera (1998-2003 / Frontera B, MK 2) In this video, you can see where the ECU is located in the Opel Frontera and how to proceed if you need to replace it. As shown, it is located inside…
Vauxhall Frontera (1998-2003 / Frontera B, MK 2) The diesel filter on the Opel Frontera is located at the bottom of the vehicle: to access it, you will need to remove the protective panel found at t…
Vauxhall Frontera (1998-2003 / Frontera B, MK 2) The vehicle shown in this video is a 2001 Opel Frontera, and now we will see how to reset the trip meter. This operation is usually performed when yo…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos