Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Vauxhall
    3. : Frontera

Vauxhall Frontera - Videoguide

Vauxhall Frontera (1998-2003 / MK 2, Fronterab)
Where is the control unit located in the Opel Frontera?
In this video, we can see where the control unit is located in the Opel Frontera and how to proceed in case we need to replace it. As shown, it is located …read all…
Posted on 16 July 2023 by ScegliAuto
Vauxhall Frontera (1998-2003 / MK 2, Fronterab)
How do you change the oil and filter in the Opel Frontera 2.2?
Changing the engine oil is easier if the oil filler cap is opened before the sump, so that the air pressure causes the liquid to flow to the outside first. So …read all…
Posted on 24 December 2022 by ScegliAuto
Vauxhall Frontera (1998-2003 / MK 2, Fronterab)
How do I replace the fuel pump on the Opel Frontera?
In order to replace the fuel pump of the Opel Frontera you have to go to the underside of the vehicle, so that you can loosen the bolts that secure the tank to …read all…
Posted on 9 October 2022 by ScegliAuto
Vauxhall Frontera (1998-2003 / MK 2, Fronterab)
How do you replace the Opel Frontera diesel filter?
The Opel Frontera diesel filter is positioned in the lower part of the vehicle: in order to access it, it will therefore be necessary to remove the protective …read all…
Posted on 22 August 2022 by ScegliAuto
Vauxhall Frontera (1998-2003 / MK 2, Fronterab)
How to disassemble the rear light of the Opel Frontera.
To disassemble the rear light of the Opel Frontera it is necessary, first of all, to unscrew three screws that hold the headlight assembly in place in its …read all…
Posted on 14 October 2023 by ScegliAuto
Control unit (1) Tail light (1) Diesel filter (1) Engine oil (1) Fuel pump (1)

How to reset the oil warning light on the Alfa Romeo Giulietta

If you want to manually reset the oil change light on your Alfa Romeo Giulietta then this guide is all you need. You do not need any diagnostic tools and will be able to complete the whole procedure without any difficulty. First, go inside the car and make sure it is completely turned off. Then keep the accelerator pedal pressed and at the same time press the brake pedal six times consecutively. When finished, keep both pedals pressed and turn on the ignition. Press the brake pedal again six more times and keep both pedals depressed for approximately 50 seconds. Turn off the ignition. Release the brake pedal and hold the accelerator pedal for another 50 seconds to complete the procedure.

Watch the video!


by ScegliAuto

More videos